Skip to content

How To Remove Tub Stopper

There can be different reasons why a tub stopper becomes stuck. Sometimes mineral deposits or rust can build up and make the stopper difficult to move. Other times the linkage may break or the cord may snap. Whatever the reason, there are several ways to remove a tub stopper. If the linkage is broken, a screwdriver or pliers can be used to pry it open. If the cord is snapped, it can often be replaced by simply unscrewing the retaining

How To Remove Tub Stopper

A tub stopper is a mechanism used to prevent water from flowing out of a bathtub when the tub is not in use. The most common type of tub stopper is a plug, which is a flat piece of rubber or plastic that fits into the drain hole at the bottom of the tub. There are also clawfoot tubs that have stoppers built into the feet of the tub. Removing a tub stopper is usually a simple process. The first step is to

-Tape measure -Pipe wrench -Channel locks -Pliers -Screwdriver – penetrating oil

  • Locate the tub stopper and identify the lever that opens it
  • Pull up on the lever to close the stopper
  • Push down on the lever to open the stopper and allow the water to drain

-What kind of tub stopper is it? -Is the stopper stuck? -If the stopper is stuck, what is preventing it from coming out? -How dirty is the stopper? -How important is it to remove the stopper?


Frequently Asked Questions

How Do You Remove A Lift And Turn Tub Stopper Without Screws?

There is usually a small flathead screwdriver that can be used to pry the stopper out.

How Do You Remove The Stopper From A Bathtub Lift And Turn?

The stopper from a bathtub lift and turn can be removed by pulling it up and out of the drain.

How Do You Remove A Flip Drain Stopper?

To remove a flip drain stopper, you must first remove the pivot screw. Once the pivot screw is removed, you can then lift the stopper off of the pivot post.

How Do You Remove Twist And Pull Drain Stoppers?

There are a few ways to remove twist and pull drain stoppers. One way is to use a pair of pliers. Grip the metal wire on the top of the stopper and pull it up and out of the drain. Another way is to use a screwdriver. Wedge the screwdriver under the lip of the stopper and pry it up.

How Do You Unscrew A Bathtub Drain Stop?

There are a few ways to unscrew a bathtub drain stop. One way is to use a pipe wrench. Another way is to use a screwdriver.

How Do You Remove A Tub Lift And Turn Stopper?

There are a few ways to remove a tub lift and turn stopper. One way is to remove the cover of the overflow plate and use a screwdriver to remove the screws that hold the lift in place. Another way is to use a pair of pliers to remove the lift from the overflow plate.


To Summarize

There are a few ways to remove a tub stopper. One way is to use a plumber’s wrench. Another way is to use a wire hanger.

Leave a Reply

Your email address will not be published.