Skip to content

How To Refinish A Cast Iron Bathtub

If your cast iron bathtub is looking a bit worse for wear, don’t fret – it can be easily refinished to its former glory! Here is a quick guide on how to refinish a cast iron bathtub. 1. Clean the tub thoroughly. Use a degreaser and a scrub brush to get rid of all the built-up gunk and soap scum. 2. Sand down the surface of the tub using medium-grit sandpaper.

How To Refinish A Cast Iron Bathtub

Cast iron bathtubs are often considered a luxurious item in a home. They are heavy, durable, and can last for many years when properly taken care of. However, over time the finish on a cast iron bathtub can become scratched or even completely worn away. In this case, it is possible to refinish the bathtub using a variety of methods. One method is to use a high-temperature paint. This type of paint is specifically made for use on cast

-Refinishing kit -Paint brush or roller -Rags -Safety goggles -Dust mask -Rubber gloves

  • strip the tub of its old finish with a stripper 2. sand the tub down to the bare metal 3. prime the tub and let it dry 4. paint the tub with a high
  • Quality enamel paint

: – Sand the surface of the tub with medium-grit sandpaper. Wipe away any dust or debris with a clean cloth. – Apply a coat of refinishing enamel to the tub using a brush. Let the enamel dry completely. – Apply a second coat of enamel, if needed. Let the enamel dry completely.


Frequently Asked Questions

How Do You Restore An Old Cast Iron Tub?

If the cast iron tub is severely rusted, the first step is to remove all of the rust. This can be done with a wire brush or a drill with a wire brush attachment. If there is any remaining rust after brushing, it can be removed with a rust remover. Once the rust is gone, the tub can be cleaned with soap and water. If there are any scratches or other blemishes on the surface, they can be fixed with a porcelain touch-up kit. Finally, to protect the tub from future rusting, it can be coated with a rust-inhibiting paint or sealant.

Can You Resurface An Old Cast Iron Tub?

Yes, but it can be a difficult and expensive process.

Can You Recoat Cast Iron Tub?

Yes, cast iron tubs can be recoated but it is a labor-intensive process and the results may not be entirely satisfactory. The old coating must be completely removed, and then the new coating applied. In many cases, the tub will start to rust again within a few years.


In The End

Cast iron bathtubs can be refinished to look new with a little bit of work. First, the tub must be cleaned and stripped of all old paint or finishes. Next, a primer must be applied to the surface. After the primer dries, a coat of paint can be applied. Finally, a sealant should be applied to protect the finish.

Leave a Reply

Your email address will not be published.