Skip to content

How To Build A Wheelchair Ramp Over Existing Steps

There are many ways to build a wheelchair ramp over existing steps. One way is to use wooden boards to create a temporary ramp. You can also use concrete blocks or bricks to create a more permanent ramp.

How To Build A Wheelchair Ramp Over Existing Steps

Wheelchair ramps are typically built to provide access over a series of steps, transitioning from one level to another. There are many ways to build a wheelchair ramp, but the most important factor is that it is safe and complies with all applicable building codes. In general, there are three types of wheelchair ramps: modular ramps, pre-fabricated ramps, and custom-made ramps. Modular ramps are the most popular type of wheelchair ramp and can be assembled in almost

Materials: – Wheelchair Ramp – Tape Measure – Level – Chisel – Hammer – Saw – Safety Glasses – Work Gloves Tools: – Drill – Circular Saw – Jigsaw – Hammer Drill – Chisel

  • Secure the wheelchair ramp in place with
  • Purchase or rent a wheelchair ramp that is the same height or taller than the steps
  • Measure the height of the steps
  • Lay the wheelchair ramp on top of the steps

– How wide should the wheelchair ramp be to ensure safe passage? – What is the recommended angle of incline for a wheelchair ramp? – Should the wheelchair ramp have a railing for safety? – How can you ensure that the wheelchair ramp is stable and will not wobble or shift when in use?


Frequently Asked Questions

Can You Put A Ramp Over Steps?

Yes, you can put a ramp over steps.

Can You Put A Ramp Over Stairs?

Ramps can be used to make it easier for people who use wheelchairs, walkers, or other mobility devices to get up and down stairs.

What Is The Best Angle For A Wheelchair Ramp?

There is no one “best” angle for a wheelchair ramp – it depends on the incline of the surface you’re trying to ramp up, and the wheelchair’s capabilities. Generally, a gentler incline is better for both the wheelchair and its occupant, so somewhere between 5 and 10 degrees is a good target.


To Review

Wheelchair ramps are a common way to make a home wheelchair accessible. However, sometimes there are existing steps at the entrance of a home that make it difficult or impossible for a wheelchair user to get in. In this case, a wheelchair ramp can be built over the existing steps. This involves building a small platform over the steps and attaching a wheelchair ramp to it. This is a relatively easy DIY project that can be completed in just a few hours.

Leave a Reply

Your email address will not be published.